DC single-acting solenoid valve control hydraulic drive unit  
     The Dc Hydraulic Power Unit controlled by the DC single-acting solenoid valve is mainly used to control the flow of fluid in the hydraulic or pneumatic system. Specifically, its role has the following aspects:
     Switch control: Dc Hydraulic Power Station solenoid valve by applying current to the solenoid coil or power off to control the valve switch state. When the solenoid is energized, the solenoid valve opens to allow fluid to pass through; when the solenoid is de-energized, the solenoid valve closes to prevent fluid from passing through. By controlling the switch state of the solenoid valve, the start and stop of the hydraulic or pneumatic system, flow control and other functions can be realized.
     Flow regulation: By adjusting the switch state of the DC single-acting solenoid valve, the flow rate of the fluid can be controlled. When multiple solenoid valves are used in combination, different flow combinations can be realized by switching different solenoid valves. In this way, the flow of fluid can be accurately controlled according to actual needs, and the precise control of hydraulic or pneumatic systems can be realized.
     Direction control: The Dc Single-Acting Hydraulic Power Pack solenoid valve can have multiple channels. By controlling the on-off status of different channels, different directions of fluid can be controlled. In this way, the flow direction of the hydraulic or pneumatic system can be switched, so that the system can work normally under different working conditions.
     Action control: DC single-acting solenoid valves are usually connected to actuators such as hydraulic cylinders or pneumatic cylinders. By controlling the switch state of the solenoid valve, the movement and position adjustment of the actuator can be realized. Through reasonable combination and control, various complex action sequences can be realized to meet the needs of industrial automation and mechanical control.
      (More Hydraulic Accessories)(More Hydraulic Power Unit)
      Welcome to consult and visit our company
      Huaian Yansheng Hydraulic Co., Ltd.

Products Name: Hydraulic Power Unit
Model: DC single acting solenoid valve control
Fuel Tank: 2 ~ 8L
Voltage: DV12V-DC72V
Power: 800KW
Specifications: can be customized

Advantages of our DC power units

1、Easy to operate

It has the characteristics of convenient installation, simple operation and stable operation.

2、valve block
High precision valve block, No burr,large flow discharge oil. 

3、Careful selection of materials
Selection of shaft sleeve, internal high-strength gear

DC double-acting power units Application display

Suitable for electric forklifts, electric stackers, dump trucks, electric sanitation vehicles, lifts, 

motorcycle lifts,car tailgates, electric pallet trucks, lifting platforms, aerial work platforms, 

electric basketball stands, boarding bridges, etc.