Hydraulic power station daily maintenance tips

In daily use, many failures of hydraulic power stations are caused by inadequate maintenance, so it is extremely important to do its maintenance and maintenance.

First, the tubing joint should be cleaned in time to prevent leakage

Clean the hydraulic power station at the end of each use. The joint connected to the hydraulic oil pipe must be cleaned, otherwise it is easy to leak the hydraulic oil.

Second, pay attention to the regular maintenance of oil tank and air filter

Every time you use the power station, check the oil first to ensure that the oil level is filled in a reasonable position, and replace the oil filter and oil regularly. Check the air filter weekly and replace the air filter and air filter sponge regularly.

Third, before use, first do a good job of the hydraulic tank inspection

Every time you use the hydraulic power station, check the hydraulic oil through the hydraulic tank window. If the hydraulic oil is lower than the original level, check the hydraulic oil before adding, check the power station or hydraulic tools for hydraulic oil leakage, especially check the hydraulic tubing joints, tighten the flat quick joint, and then add hydraulic oil.